Marlin Dark 444 Comet Brake (Ilion, NY barrel stamp)

Ranger Point Precision

$99.00

(No reviews yet) Write a Review

SKU:: 143
UPC:: 850078134028
Availability:: Usually ships within 5–7 business days.
MUZZLE BRAKE:: Reduces recoil and muzzle flash by approximately 25%
FITS Original Marlin Dark Rifles (made before 2020):: This brake is made for the original Remington-made Marlin Dark 1895 rifles: smaller barrel diameter (Ilion, NY barrel stamp)
REMINGTON SERIAL # STARTS W/ MR:: Marlin Dark Series 444 (.800" OD / 11/16 x 24 tpi)
INSTALLATION:: Blue Loctite (not red) + hand tighten onto threaded barrelBLUE LOCTITE + HAND TIGHTENED ONTO THREADED BARREL
Finish:: Nitride
Material:: Steel

Current Stock:

Quantity:

The "Comet Brake" is designed to be a slim, flush fit and aggressive rifle muzzle brake that works especially well to reduce felt recoil.

Each brake is made to match the exact OD (outer diameter) and the thread pitch (tpi) of the rifle make/model that's listed.

Your rifle MUST be threaded to use this brake.

If you plan to get your rifle threaded by a gunsmith, provide them with the exact specs listed.

Tough, stress proof steel construction (salt bath black nitride 4140 steel)
Reduces recoil and muzzle flash by approximately 25%
Not a one-size-fits-all (1.65" total length, 1" hangs past barrel when installed)
Designed for optimal performance and accuracy with individual calibers
To install, hand tighten and use blue Loctite, no indexing or torque specs

DEALERS: BULK ORDER OPTIONS ARE AVAILABLE WITH NO COATING FOR THOSE THAT CERAKOTE. CONTACT US TO PLACE YOUR ORDER OF 6 OR MORE.

The "Comet Brake" is designed to be a slim, flush fit and aggressive rifle muzzle brake that works especially well to reduce felt recoil.

Each brake is made to match the exact OD (outer diameter) and the thread pitch (tpi) of the rifle make/model that's listed.

Your rifle MUST be threaded to use this brake.

If you plan to get your rifle threaded by a gunsmith, provide them with the exact specs listed.

Tough, stress proof steel construction (salt bath black nitride 4140 steel)
Reduces recoil and muzzle flash by approximately 25%
Not a one-size-fits-all (1.65" total length, 1" hangs past barrel when installed)
Designed for optimal performance and accuracy with individual calibers
To install, hand tighten and use blue Loctite, no indexing or torque specs

DEALERS: BULK ORDER OPTIONS ARE AVAILABLE WITH NO COATING FOR THOSE THAT CERAKOTE. CONTACT US TO PLACE YOUR ORDER OF 6 OR MORE.